Question: What element joins iron to become steel?

Answer: Steel is an alloy of iron and carbon that is widely used in construction and other applications because of its hardness and strength. To make steel, iron ore is heated and melted in furnaces where the impurities are removed and is carbon added. The carbon content of steel is between 0.08 to 1.5 percent. Steel is one of the most widely used metals in the world. It’s cheap, strong and incredibly versatile. With worldwide production at more than 1.3 billion tons per year, steel is the second most mass-produced commodity behind cement.


BING based on video search results

1  Matrix Iron Face Carbon Steel Striker Metal Mesh Lower Half Mask
Dr. Airsoft and Rangemaster Larry of Airsoft Medicine review the Matrix generation 1 and 2 masks which are lower-priced models similar to the Brass Guard line of airsoft lower face wire mesh airsoft masks. I found the Matrix masks to be made of a lighter guage metal mesh than the Brass Guard masks.
Watch Video: https://www.youtube.com/watch?v=c0pOvXZW-qk

Top 10 Results

1Carbon element joins iron to become steel
Step 1 : Introduction to the question “What element joins iron to become steel? Steel is an alloy of iron and carbon that is widely used in construction and other applications because of its hardness and strength. To make steel, iron ore is heated and melted in furnaces where the impurities are removed and is carbon added.
https://www.try3steps.com/2020/09/ans-what-element-joins-iron-to-become.html

2Carbon element joins iron to become steel
What element joins iron to become steel? Generally, iron-carbon alloys with up to 2.1% carbon by weight are considered steel and iron-carbon alloys with greater amounts of carbon are cast iron. Cast iron is made by re-melting pig iron in a blast furnace, removing undesirable elements like phosphorus and sulfur, adjusting carbon levels and …
https://themillennialmirror.com/trends/what-element-joins-iron-to-become-steel/

3Carbon element joins iron to become steel
Steel is an alloy of iron with typically a few percent of carbon to improve its strength and fracture resistance compared to iron. Many other additional elements may be present or added. Stainless steels that are corrosion and oxidation resistant need typically an additional 11% chromium.Because of its high tensile strength and low cost, steel is used in buildings, infrastructure, tools, ships …
https://en.wikipedia.org/wiki/Steel

4Carbon element joins iron to become steel
Steel wool, being made from steel, is an alloy of a number of different elements. Carbon and iron are the main two, though others are frequently added to give steel various other characteristics.
https://www.answers.com/Q/What_is_added_to_iron_to_make_steel_and_give_different_proportions

5Carbon element joins iron to become steel
The most common element added to steel is carbon. Although many different elements such as chromium and manganese may be added to iron to make steel, carbon is the most … Become a Member.
https://study.com/academy/lesson/effect-of-adding-carbon-to-steel.html

6Carbon steel

Carbon steel is a steel with carbon content from about 0.05% up to 2.1% by weight. The definition of carbon steel from the American Iron and Steel Institute (AISI) states: . no minimum content is specified or required for chromium, cobalt, molybdenum, nickel, niobium, titanium, tungsten, vanadium, zirconium, or any other element to be added to obtain a desired alloying effect;
https://en.wikipedia.org/wiki/Carbon_steel

7Steel

The pig iron, limestone and iron ore go into an open-hearth furnace. It is heated to about 1,600 degrees F (871 degrees C). The limestone and ore form a slag that floats on the surface. Impurities, including carbon, are oxidized and float out of the iron into the slag. When the carbon content is right, you have carbon steel. Advertisement
https://science.howstuffworks.com/iron4.htm

8Steel

Chemical Composition of Steel – Elements in the Periodic Table . Carbon – C. Carbon is added to iron to make steel. In its pure form iron is quite soft and adding up to 2% carbon gives it toughness and strength. Structural steels plates typically contain about 0.15 to 0.3% Carbon.
https://www.oakleysteel.co.uk/chemical-composition-steel

9Steel

Steel, alloy of iron and carbon in which the carbon content ranges up to 2 percent (with a higher carbon content, the material is defined as cast iron). By far the most widely used material for building the world’s infrastructure and industries, it is used to fabricate everything from sewing needles to oil tankers. In addition, the tools required to build and manufacture such articles are …
https://www.britannica.com/technology/steel

10Carbon element joins iron to become steel
or the maximum content specified for any of the following elements does not exceed the percentages noted: manganese 1.65, silicon 0.60, copper 0.60. [1] The term “carbon steel” may also be used in reference to steel which is not stainless steel; in this use carbon steel may include alloy steels. High carbon steel has many different uses such as milling machines, cutting tools, such as chisels …
https://www.coursehero.com/file/68569468/Carbon-steel-Wikipediapdf/

News results

1Metallurgical coal may eventually join list of fuel sources with no future
IF nickel, copper, cobalt, manganese and even vanadium are winning minerals in the new world order of carbon neutrality, then there must be some losers too; those that remain eternally tethered to the era of pylons and brick-built chimneys.
https://www.miningmx.com/news/energy/43649-metallurgical-coal-may-eventually-join-list-of-fuel-sources-with-no-future/
Published Date: 2020-09-17T07:46:00.0000000Z

2TMT4240 Microstructure And Properties Of Metals
Sketch the microstructures and discuss the properties of each phase (e.g. stiffness, strength, toughness, ductility) with reference to typical applications. With the aid of a diagram, explain the micro-structure of Ferrite-Martensite Dual Phase (DP) steels and discuss the advantages of using DP steels incar manufacturing.
https://myassignmenthelp.com/free-samples/tmt4240-microstructure-and-properties-of-metals
Published Date: 2020-09-24T10:04:00.0000000Z


Wikipedia Search Results

1.  Carbon
Carbon (from Latin: carbo "coal") is a chemical element with the symbol C and atomic number 6. It is nonmetallic and tetravalent—making four electrons…
https://en.wikipedia.org/wiki/Carbon

2.  Silicon
cementite where exposed to outside air. The presence of elemental silicon in molten iron acts as a sink for oxygen, so that the steel carbon content, which must…
https://en.wikipedia.org/wiki/Silicon

3.  Reinforced concrete
The home was designed to be fireproof for his wife. G. A. Wayss was a German civil engineer and a pioneer of the iron and steel concrete construction…
https://en.wikipedia.org/wiki/Reinforced concrete